The M18 is made of Cromo steel. So it is very strong because it can carry a load of up to 8 kg. It fits on many forks because of the flexible connection on the front legs and on the crown piece. To make sure the paint doesn't get damaged there are rubber bands on the fork to protect it. Finely finished rack, much imitated but there is only 1 Nitto! The rack weighs 350gram.More info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooks
Products
The M18 is made of Cromo steel. So it is very strong because it can carry a load of up to 8 kg. It fits on many forks because of the flexible connection on the front legs and on the crown piece. To make sure the paint doesn't get damaged there are rubber bands on the fork to protect it. Finely finished rack, much imitated but there is only 1 Nitto! The rack weighs 350gram.More info & order
Bar plug for racing or MTB handlebars. Various diameters so can do both. Made of aluminum. With a color. So extra mojo.
EC-01 inside 20-22mm outside 24mm Ø
EC-02 inside 15.5-17mm outsite 24mm ØMore info & order
Saddle cover made of ultra-light, waterproof and tear-resistant polyester. Made in the workshop in Fleurville, Burgundy.
Ideal for protecting the Soulor/Galibier or Aspin/Aravis when transporting your bike, storing it outside or riding in heavy rain.
For the most minimalist cyclists who ride without fenders, we recommend our "integral" model that completely encases the saddle for maximum splash protection. A highly recommended investment to keep your leather clean even in the harshest conditions.
The "integral" model
Integrated saddle cover, made of ultra-light, waterproof and tear-resistant polyester. Made in our workshops in Fleurville, Burgundy.
Ideal for protecting racing models (Soulor/Galibier) or touring models (Aspin/Aravis). This model is distinguished by the cord that you can pull so that the cover better encloses the saddle. A bit more expensive, a bit more chic.
More info & order
This is a set of stainless steel daruma hardware that is included with our Campeur Racks and is compatible with our cantilever or straight arms. This set is also compatible with Nitto's similar offerings. More info & order
Half clips give you most of the advantages of a full toe clip, but without straps. They are fantastic for city bikes, touring bikes, or any bike when you want the extra efficiency of toe clips without the bother of straps. Highly recommended.
These are made of stainless steel and are extra deep to fit bulky street shoes and running shoes. Their length is about 65mm from the front of the pedal to the curve in the clip. A pair weighs 83 gr with hardware.
Per pair; hardware included.
A good quality toe clip and strap is ubiquitous on any classic and vintage bike. These are made from stainless steel and are available in two reach sizes (distance they stick out from the pedal): Medium, 58mm and Large, 64mm
Price is per pair. Mounting hardware included.More info & order
The handy plug connection from hub dynamo to cable. Some skill with soldering is a plus. More info & order
Tandem inner cable for brake or gear. STAINLESS STEEL. 3 meters long. and for the gear cable the diameter is 1.1mm and for the brake 1.5mm. The gear cable has a barrel or a bushing end and the brake a barrel or a pear. More info & order
Pro Pump Action with spring loaded plunger & 2" Nozzle.
Push Type Utility Grease Guns require only one hand to operate and are ideal for working in confined areas where lever action guns are inconvenient. All models will handle multi-viscous lubricant grades, and are highly recomended for special purpose bulk lubricants.
• Lightweight, compact & easy to use
• Durable all metal construction
• Self activated priming
• Quick service, refill & cleaning
• Ground plunger & ball check
• Pinpoint accuracy
More info & order
With freewheel function and fixed function
(Adjustment over seven turns with the screwdriver on the outside of the shaft)
Aluminum hub
Frame installation width: 120 mm Number of spoke holes
: 32
Shaft nut thread M10x1 Total shaft length
174 mm Flange distance
(symmetrical) 59 mm
Spoke hole diameter 67 mm
Spoke hole diameter 2.6 mm
Chainline 46 mm
Weight of hub: approx. 480 g
Drive mode Fixed gear:
Using a small flathead screwdriver, turn the set screw in the shaft on the sprocket side clockwise as far as it will go.
Note: In fixed gear, the pedals always rotate. Familiarize yourself with the riding mode before participating in traffic.
Drive Mode Freewheel:
Using a small flat-blade screwdriver, turn the adjustment screw clockwise as far as it will go, then turn it back 5 full turns.More info & order
It is one of the most used rims for travel bikes and proves time after time that it is almost indestructible!
SHAPE - double wall
JOINT - pin
TIRE USE - tube
HOOK TYPE - crotchet
BRAKE TYPE - rim brake
WEIGHT RIM BRAKE - 718
ERD (MM) - 535
MECHINICAL TREATMENT - CNC
CHEMICAL TREATMENT - powder coated
black
SPOKE HOLES - 32
VALVE HOLE Ø 6,5 (MM)
MAX. SPOKE TENSION 1400(N)
TIRE WIDTH (MM)
28-57
AXLE LOAD (KG)
max 120More info & order
The AR-2 features a unique asymmetrical cage plate design that provides extra room inside the shaft for wide shoes compared to traditional pedals like the Sylvan Road. The AR-2 is designed to be used with toe clips and straps. But it can also be used without.
The Ezy system allows the pedals to be removed safely, quickly and without tools for travel, storage or flexibility.
Especially popular as an upgrade for folding bikes, people who take their bikes on public transport or on travel bikes with clutch systems.
To use the Ezy pedal, simply remove the yellow retaining ring and pull back the collar attached to the crank arm to release or mount the pedal.
The stopper must be installed. If the stopper is not installed, the attachment of the pedal is incomplete.
Without the stopper, the adapter may break, or the pedal may fall off resulting in serious injuryMore info & order
With a total cable pull of over 50 mm, these shifters work with just about any derailleur. Suitable for Shimano 11 speed road bikes, Shimano 10 speed mountain bikes (Dynasys) and Sensah SRX. Here's what you need to know:
Designed for 11 speed, but also works with fewer gears.
Better option for 10 speed drivetrains than our other Dia-compe levers
Friction (non-indexed), micro ratchet design
Right cylinder is larger than the left for more pull on the cable
Not compatible with bar end or "thumbie" mounts due to the oversized barrel
To calculate the total cable pull for your drive, use the following formula:
total cable pull = cable pull of the intended shifter * (s - 1), where s is the number of gears on your cassette. If the total is less than 50mm, these shifters should work.
More info & order