More info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooks
Products
More info & order
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks).
Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg.
The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages.
The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs.
Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs. You can use our Straight Arms for Campeur Racks, Compression Hardware, and a pair of p-clamps around the rack's tube if you are running super heavy loads and want more stability. You can load it up with 40 lbs of gear if you use this configuration.More info & order
MINOURA Front rack for v-brake-cantilever using an attached quick release. Black pouder paint finition. 1.2kgs, chargeble 10kgs
Low-rider type Front carrier for 700C touring/ Cyclocross or MTB bike with V or cantilever brake
Durable and anti roll design
Steel tube material and black powder paint finish
Fits 26inch to 700C (NOT recommend for suspension forks)
Does not mount to Hub nut axle wheel bikesMore info & order
Decaleurs are traditional quick-release mounts for handlebar bags. Unlike some modern bag mounts, they keep the bag low for better handling and for keeping the handlebars clear. The VO fork mount decaleurs are mounted on the fork's steerer tube either below the headset lock nut or within the spacer stack.
Full stainless steel construction
Available to fit 1" and 1-1/8" forks
Works with most traditional-style bags such as Velo Orange, Acorn, Ostrich, Sologne, Berthoud, TA, LaFuma, and similar
Receiver uses a 3mm thick spacer
Bag Mount uses 6mm posts
Mounting hardware included
Posts are 8 cm forward of the front of the headset ring
Please remember that a decaleur is intended as a quick-release mechanism, not a support for the full weight of the bag; the bag must still rest on a rack or on the fender. Fork mounted decaleurs can be bent slightly to adjust the bag's height, but they might not work with very tall or short frames (for those frames we recommend a front rack with an Integrated Decaleur).
Note: We strongly recommend that you use at least one strap or elastic cord, in addition to the decaleur, to secure your bag to your front rack. If you hit a large bump or pothole, it is possible that your bag could bounce up, detaching the bag from the decaleur receiver.More info & order
The Constructeur Front Rack is a medium sized front rack that attaches to your fork's dropout eyelets. It's simple design is perfect for a handlebar bag, tied-down dry bag, or basket.
All Velo Orange racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The height of the rack from the lowest hole on the tang to the bottom of the platform is 37cm. The platform is 20cm long and 10cm wide. The tombstone (backstop) is 9.5cm tall.
There are three holes in the lower tang so that it can be cut to give your bike a real Constructeur-style.
6.8kg maximum weight capacity.
Please note: This rack does not fit suspension forks.More info & order
This is a stainless steel front rack that is perfect for a handlebar bag, tied-down dry bag, or basket.
All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.7 cm long and 10.2 cm wide. The tombstone (backstop) is 9.5 cm tall.
If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of your bag to ensure it says put over the rough stuff.
If you are getting a custom frame made, we suggest sending the rack to the builder beforehand.
5.4kg max weight capacity.
All mounting hardware is included. Installation instructions found here.
This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack if you don't have cantilever brakes.
More info & order
This is a stainless steel front rack that is perfect for a handlebar bag. The decaleur (bag mount receiver) is integrated into the rack platform. The advantage to this system is: your bag-decaleur-rack combination is more solid, lighter, and less likely to rattle. Integration is the Holy Grail of Constucteur-style bikes, and we feel that these racks are a big step in that direction.
All VO racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.5 cm long and 10.2 cm wide.
Most traditional style handlebar bags work perfectly with this rack (any bag around 20cm tall), but very tall bags may need a longer bag mount. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of the bag to ensure it says put over the rough stuff.
If you are getting a custom frame made, we suggest sending the rack to the builder beforehand.
This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack with Integrated Decaleur if you don't have cantilever brakes.
12lbs (5.4kg) max weight capacity.
All mounting hardware is includedMore info & order
The Seine Bar is an offroad-worthy riser bar featuring a super comfortable position with loads of real estate and leverage for long days in and out of the saddle.
Straddling the line between touring and full-on MTB, these bars are wide - 780mm to be exact. This width allows you to select climbing lines with ease and navigate bumpy descents without drama. If they're too wide for your trail or your commute, they can still be cut down to really dial in your fit.
The rise is a cool 40mm and sweep is 35°. So while these were mainly designed to satisfy off-road touring enthusiasts' mixed terrain needs, they are an excellent option for commuters and flat-bar gravel connoisseurs alike.
At 205mm in length, the grip area is more than enough for modern sized grips, brake levers, and shifters - and there is still room to cut down if they are too wide from the get-go. The clamp diameter is 31.8mm and the grip diameter is 22.2mm.
Width: 780mm
Sweep: 35°
Grip area: 205mm
Rise/drop: 40mm
Stem clamp diameter: 31.8mm
Grip diameter: 22.2mm
Weight: 443g
Material: Aluminum Alloy
MTB approved
Bead-blast finish in Silver and NoirMore info & order
Aluminium polish Hammered, wide 35 mm, height 17 mm for 700x23-28C, R358x840(FR)x1200(RE). Fixation set, 1 pair of stay 4mm, 4 tightening stays Maki (roll), 2 hangers, 2 tighting stay-fender.More info & order
This is a handy solution for cyclists with more than 1 bike. Well, now I'm addressing a small minority, every cyclist knows that. Share the same pedals on multiple bikes! Just install a set of Rinko adapters on each bike, and then you can swap any MKS "EZY-Superior" Rinko pedal in seconds, without tools.More info & order
The perfect roadside option when a mini-pump just takes too long. The classic option for mobile inflation has been updated to use a two stage gasket, leather piston, and has a snug fit on the frame.More info & order
• Made in U.S.A. (Maysville, KY)
• The rack measures 20 1/2” side to side x 13” front to back
• Extended handlebar clamps are 2” apart, allow greater clearance for shift and brake cables, and fit 7/8″,
1″and 1 1/4″ diameter handlebars
• Legs extend from 13 3/4” to 21 1/4 “and have two mounting holes for mounting to either the axle or
fork eyelets for bikes with quick release front hubs
• Powder Coat Finish
• Complete rack with fittings weighs 6.0 lbs.More info & order