Categories
Frontrack
Nitto CAMPEE FrontIn the dynamic world of cycling, where every pedal stroke tells a story and every road carries an adventure, this front carrier introduces a new chapter in the saga of travel on two wheels. A true alchemist who transforms the gravel paths into golden routes of delight, this rack provides a stage for the traveler to thrive in his wanderings. With its sturdy construction and robust design, this rack is ready to take on the challenges of any journey, whether braving the rugged gravel roads of the backcountry or exploring the cobblestone streets of a quaint village. It provides not only a place to carry your luggage, but also a sense of freedom and independence that is essential for the modern traveler. ●Hollow steel ●Maximum load: 16 kg ●For 700c ●Mounting hole lamp holder: M5 ●Bracket for cantilever brake base included ●Fixing screws included ●L295 x B240 x H490mm ●Bottom plate: L200 x B95mm ●1.185kgMore info & order
Pizza RackThe Pizza Rack is ready to make those wide, awkward carries a breeze, and is perfect for commuting or bikepacking while keeping your gear within reach. Great for a Basket, Caradice bag, Porteur Bag or just, a bunch of bungees. With a Heavy Duty version of the Elkhorn uprights, and a 10″ x 12.9″ deck the Pizza Rack can comfortably carry up to 35lbs of gear. The solid center deck provides more tie-down points than you could ever need, keeps your gear out of your tire, and doubles as a fender! The Pizza Rack come with everything you need to Eyelet mount the rack on the front of your bike. If you don’t have eyelets, Old Man Mountain racks are the most versatile racks available. Our Fit Kits are capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?More info & order
Nitto M-18The M18 is made of Cromo steel. So it is very strong because it can carry a load of up to 8 kg. It fits on many forks because of the flexible connection on the front legs and on the crown piece. To make sure the paint doesn't get damaged there are rubber bands on the fork to protect it. Finely finished rack, much imitated but there is only 1 Nitto! The rack weighs 350gram.More info & order
Jtek Alloy Front Carrier - Cantilever Boss Mounting - BlackIncludes dynamo headlight bosses to mount on left or right sides. Dimensions: - 165mm Front to back on surface rack rails (overall length) - 130mm Cantilever mounting bolt to surface rack rails - 250mm Overall height approx. from cantilever mountings to top of rack. Fits between 70mm and 80mm cantilever bolt centres plus a little extra adjustment with bending if needed. MAX LOAD: 1500gMore info & order
Campeur Front RackMore info & order
BLB T-Rack The BLB T-Rack (black) is a classic old school style rack, which works beautifully for daily use or longer tours. You carry anything from books to shopping, take-aways to a 4 pack of beer and still look brilliant. The universal heavy duty wheel mount bracket system means it’s the smart choice any bike - 26",28" and/or 29"/700c wheels. Supplied with three different mounts, it's compatible with standard solid axles (including female versions) and can also be mounted to forks using either rack or mudguard eyelets. BLB T-Rack is stylish and functional and most importantly won't break the bank.More info & order
BLB Frontier RackThe BLB Frontier front rack is the latest addition to our wide range of bike accessories. The Frontier is the perfect addition to any urban ride: An elegant flat bed rack enabling to carry large and odd shaped item with ease. Perfect for everyday use and will handle any job. While the universal heavy duty wheel mount brackets system means it is the smart choice for and cyclists as it is likely to fit any bike. It is compatible with most bike setups and will fit 26", 28" and 29"/700c wheels. The BLB Frontier is also compatible with both QR and standard solid axles (including female axles) and can also be mounted to forks with eyelets thanks to pre-drilled stays. BLB's Frontier is made from high quality stainless steel and all mounting hardware is included. Fixies/Racers/hybrid/vintage…. whatever your ride is - this rack would work for you. • W38cm x D30.5cm • stainless steel • compatible with QR and steel axles • will fit 26"/28"/29"/700c wheels • carry up to 18kg • 1kg More info & order
Minoura Front rack FPR3000MINOURA Front rack for v-brake-cantilever using an attached quick release. Black pouder paint finition. 1.2kgs, chargeble 10kgs Low-rider type Front carrier for 700C touring/ Cyclocross or MTB bike with V or cantilever brake Durable and anti roll design Steel tube material and black powder paint finish Fits 26inch to 700C (NOT recommend for suspension forks) Does not mount to Hub nut axle wheel bikesMore info & order
Porteur RackThe VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs. You can use our Straight Arms for Campeur Racks, Compression Hardware, and a pair of p-clamps around the rack's tube if you are running super heavy loads and want more stability. You can load it up with 40 lbs of gear if you use this configuration.More info & order
Constructeur Front RackThe Constructeur Front Rack is a medium sized front rack that attaches to your fork's dropout eyelets. It's simple design is perfect for a handlebar bag, tied-down dry bag, or basket. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The height of the rack from the lowest hole on the tang to the bottom of the platform is 37cm. The platform is 20cm long and 10cm wide. The tombstone (backstop) is 9.5cm tall. There are three holes in the lower tang so that it can be cut to give your bike a real Constructeur-style. 6.8kg maximum weight capacity. Please note: This rack does not fit suspension forks.More info & order
Randonneur Front Rack, CantileverThis is a stainless steel front rack that is perfect for a handlebar bag, tied-down dry bag, or basket. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.7 cm long and 10.2 cm wide. The tombstone (backstop) is 9.5 cm tall. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of your bag to ensure it says put over the rough stuff. If you are getting a custom frame made, we suggest sending the rack to the builder beforehand. 5.4kg max weight capacity. All mounting hardware is included. Installation instructions found here. This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack if you don't have cantilever brakes. More info & order
Flat Pack RackThe Velo Orange Flat Pack Rack is designed to be super strong and adaptable, allowing it to be neatly mounted on nearly any bike with rack mounts on the fork blades. Adjustability is accomplished by employing sliding stays and darumas to dial in the position and level of the rack. With so many forks out there riddled with eyelets and holes for low-riders and 3-pack mounts, you can choose where the rack will mount. The platform is known as a “demi-porteur”. Its size is somewhere between a full Porteur and traditional Randonneur front rack. The main benefit to the demi-porteur style is better stabilization for large Randonneur Handlebar Bags as well as better support for baskets and large, bikepacking bags. The uprights are removable and can be interchanged between a decaleur receiver for a Randonneur-style handlebar bag and a tombstone loop for a basket or other luggage. When disassembled, it can fold almost completely flat - which is really useful for travel where space is at a premium. The Flat Pack Rack mounts to the fork crown using a little do-dad we call a Foot. This beefy mount sits flat against the fork crown and is also mounted to a daruma-style receiver, so it can slide up or down and in and out depending on your clearance needs. The lower portion of the stays are curved in such a way that they can mount flush on the side of your fork's blades. Additionally, the front of the rack features a braze-on for a light mount. The kit includes all the hardware you need to install the rack on most bikes: Four aluminum alloy stays - use two for a weight capacity of 12 lbs or use all four for a weight capacity of up to 17 lbs. Five daruma assemblies Decaleur receiver Backstop Foot with M6 bolt, washer, and nylock nut Screws for fork mounting Details: Platform size: 27.5cm x 20.3cm Weight (including all hardware): 708g Material: Stainless steel platform, backstop, and mounting hardware. Aluminum alloy stays and daruma. Weight capacity: 12lbs with two stays / 17lbs with all four staysMore info & order