With freewheel function and fixed function
(Adjustment over seven turns with the screwdriver on the outside of the shaft)
Frame installation width: 120 mm Number of spoke holes
Shaft nut thread M10x1 Total shaft length
174 mm Flange distance
(symmetrical) 59 mm
Spoke hole diameter 67 mm
Spoke hole diameter 2.6 mm
Chainline 46 mm
Weight of hub: approx. 480 g
Drive mode Fixed gear:
Using a small flathead screwdriver, turn the set screw in the shaft on the sprocket side clockwise as far as it will go.
Note: In fixed gear, the pedals always rotate. Familiarize yourself with the riding mode before participating in traffic.
Drive Mode Freewheel:
Using a small flat-blade screwdriver, turn the adjustment screw clockwise as far as it will go, then turn it back 5 full turns.
Per piece: € 36,30