It is used for trikes, recumbent bikes, and downhill riding.
Front hub, compatible with a thru-axle (not included.
Disc(6-bolts)
Hole Count : 36
Weight : 230g ± 5g
Material : Aluminum
Gauge : 14
Bearings : 2 (6805+6904)
P.C.D : ø 58 - ø 58
- ID : 20mmMore info & orderBella CiaoBerthoudCyclesBLBBrave Machine ComponentsBuschMullerCrane BellsDia-CompeMiscellaneousGevenalleGrandBoisGreppGropesHALOHonjoHopetechH+SONInterlocRacingDesignJtekKoolstopLiberteCyclesMicheMicroshiftMinouraMKSNewbaumNittoNovaTecOld Man MountainOstrichPacentiPanaracerReneHerseRestrapRivendellRohloffRoyceRustinesRydeSanMarcoSamuraiSchlumpfSchmidt Original NabendynamoShimanoShutter PrecisionSilcaSomaSpecialites TASuginoSunXCDSupernovaSpurCycleSteve PottsStronglightSwiftTanankaTangeTektroTRPTubolitoVelociVelocityVelogicalVeloOrangeVeloxWaldWeraWTBYokozumaZefalBrooks FlyerBrooks B17Brooks NOS
Miscellaneous
It is used for trikes, recumbent bikes, and downhill riding.
Front hub, compatible with a thru-axle (not included.
Disc(6-bolts)
Hole Count : 36
Weight : 230g ± 5g
Material : Aluminum
Gauge : 14
Bearings : 2 (6805+6904)
P.C.D : ø 58 - ø 58
- ID : 20mmMore info & order
You’re bound to run into this problem. You want your gears to run along the bracket, but how do you manage that without lugs on the frame? Here’s the solution for 28.6mm tubes—the size used on old steel frames. From Suntour—they used to make these. And here they are. On the left is a stopper for the front derailleur, and on the right is a guide channel for the cable to the rear. More info & order
More info & order
The shims you place between the gear plates if the indexing isn't working properly or if you need just a little more or less space. More info & order
Water resistant
Compatible with 26" to 700c wheels, 6V/3W Output
6061 T6 Al shell/7075 Al end caps
High grade (ABEC 5) bearings
Supplied as 15x110mm Thru-axle; axle converters available separately
More info & order
XT naaf van Shimano 12/142 36 gaats, zwartMore info & order
WHEELS BSA/68-73 'MTB'-bottombracket, Enduro-Lager Abec3
voor 24 mm-crank (Shimano-standaard), blackMore info & order
A bit unusual, but so much fun. An old-school BMX saddle with a raised back. In juicy pink and black. But that's a bit boring. This version has some padding, so it's soft enough. 330 grams.More info & order
Iets langer dan 'normaal'. 73mm. More info & order
The Schwalbe Airmax Pro digital tire pressure gauge is extremely accurate. It measures pressure up to a maximum of 11 bar and is suitable for car and Presta valves. It can also be used to measure air pressure in classic bicycle valves, but only in combination with the Schwalbe valve insert.
Tip: test the air pressure at least once a month with a tire pressure gauge. The well-known thumb test is particularly unreliable. Even with only half the required air pressure, most tires still feel hard. Insufficient air pressure is very common in bicycle tires. The result is a drastically higher rolling resistance and premature tire wear.More info & order
Thread M22 x 1 (Shimano, Campagnolo, Sram) and M23 x 1, which means it fits standard cranks and older TA models.More info & order
26" x 1.75,
19-559,
36 holes,
max. load up to 150 kg system weight
aluminum,
hollow chamber turned on the side
double eye,
/Large valve hole
21.5 mm high, 19 mm inner width, 24 mm outer width, maximum spoke tension 1200 Nm,
with wear indicatorMore info & order