Categories
Products
Tanaka Bottle Cage DromedaryStainless steel, for large water bottles, Nalgene, Kanteen, with the beautiful 8 moves system, so it always fits. Designed for bottles with a diameter of 9 cm such as the Nalgene liter bottle • Tubular stainless steel construction • Two different mounting positions • Suitable for bottles with a diameter of 9 cm and a height of 45 cm at the “shoulder” • Made in JapanMore info & order
Tanaka Eight Moves Bottle CageThe Eight Moves bottle cages has eight mounting slots to allows to be adjusted up and down to make room for another cage or a frame bag, etc. The "No-Bend" version does not have the "hook" on the back that common bottle cages have. This allows this cages to fit a variety of non-bike specific bottles such as a Klean Kanteen Classic Insulated 20 oz or a Hydroflask Standard Mouth Vacuum 24 oz. (A Volle strap is recommended to keep the bottle from popping out on rough pavement.) • Aluminum construction • Bolts not included • Made in Japan More info & order
Shim 22.2mm - 25.4mmYou have a 1 ⅛-inch head tube and a 1-inch stem. What's next? Tadaaaa! Here's the solution.More info & order
wedge22mmMore info & order
Bridge byb298 Flyer BrooksMore info & order
B67 BYB232 bridgeThis is the very top bridge that sits directly under the leather deck. There is also the lower bridge which is clamped onto the seat post prop. Please check which item you need. If your saddle is broken at the clamping of the seat post then you need to buy the lower bridge! Upper bridge for B67 men's saddles and the Brooks Conquest men's. Brooks number: BYB 232More info & order
GrandBois MAES ItalianNitto M104-based brake cable-grooved handlebar. The basic style is the traditional Italian Cinelli/Giro-type bend, but the bulging handle is Granboa's basic specification. Of course, it has a polished finish and will shine if you polish it. Width 410 mm. Reach 96 mm. Drop 150 mm. Clamp diameter 26.0 mm. Weight: 316 g. Made in Japan.More info & order
1267-2• Cold forged aluminum with cable angle adjuster and ferrule • 8mm ID hole • 25mm pitchMore info & order
Cablehanger for A-head • cable hanger for AHEADSET fork • 1“ • Cable drop : 34mm • Cold forged aluminum • Color : Silver or Black anodized • with short flexie 95mmMore info & order
RVS fender 28 inch 700c 55mmSmooth classic set fenders, 55mm wide. Front fender is 72cm long, rear fender is 122cm long. Pre-drilled for the fender bar. The front fender has a lip for easy mounting. On the rear fender there is a preparation for the rear light. With 2 rods, 2 eye bolts, 4 p-clips 2 leather washers and an attachment for the rear fender.More info & order
Mudguard taillightSpecially designed for mounting on the rear mudguard. This rear light is made of plastic, equipped with a luminous LED and adapted to a hub dynamo. Optimum visibility. Good looks. Solid mounting.More info & order
Freewheel Rear Hub 126mmFinding a high-flange freewheel hub that is both high quality and affordable isn't easy to do these days, and it's even harder to find one in 126mm spacing for older frames. The Velo Orange Freewheel Hub fills that gap perfectly. The hubshell is cold forged and CNC'd, while the high polish clear anodized finish will hold up to even the worst weather. The bearings are sealed cartridge, so they'll be happily spinning for years to come without requiring maintenance. The quick release is included and the hub accepts standard English thread freewheels. Suitable for most 5, 6, and 7 speed freewheels. Frame Spacing: 126mm Spoke flange diameter: 61mm Left Center-to-Flange: 41mm Right Center-to-Flange: 21mm Finish: Polished Aluminum Alloy Weight: 295g Drilling: 36 hole Includes internal cam QR skewerMore info & order