Jtek Alloy Front Carrier - Cantilever Boss Mounting - BlackIncludes dynamo headlight bosses to mount on left or right sides. Dimensions: - 165mm Front to back on surface rack rails (overall length) - 130mm Cantilever mounting bolt to surface rack rails - 250mm Overall height approx. from cantilever mountings to top of rack. Fits between 70mm and 80mm cantilever bolt centres plus a little extra adjustment with bending if needed. MAX LOAD: 1500gMore info & order
Velo Orange Straight Arms for Campeur RacksThese are straight arms that are compatible with our Campeur Racks. They're made from 7mm aluminum alloy rod and are 250mm in length. While they are designed for VO racks, they should work fine on Nitto's offerings as well. You may also need daruma hardware to connect these to your rack.More info & order
BLB Frontier RackThe BLB Frontier front rack is the latest addition to our wide range of bike accessories. The Frontier is the perfect addition to any urban ride: An elegant flat bed rack enabling to carry large and odd shaped item with ease. Perfect for everyday use and will handle any job. While the universal heavy duty wheel mount brackets system means it is the smart choice for and cyclists as it is likely to fit any bike. It is compatible with most bike setups and will fit 26", 28" and 29"/700c wheels. The BLB Frontier is also compatible with both QR and standard solid axles (including female axles) and can also be mounted to forks with eyelets thanks to pre-drilled stays. BLB's Frontier is made from high quality stainless steel and all mounting hardware is included. Fixies/Racers/hybrid/vintage…. whatever your ride is - this rack would work for you. • W38cm x D30.5cm • stainless steel • compatible with QR and steel axles • will fit 26"/28"/29"/700c wheels • carry up to 18kg • 1kg More info & order
BLB LITE RACKThe BLB Lite Rack is a stylish, small, perfectly formed front rack. As with all BLB components, it’s beautifully made of aluminium. At only 270 grams is super lightweight weight and is able to take up to 2.5kg. It’s easily fitted, looks stunning to every bike. The rack comes with fittings for standard mudguard eyelets (bolts not included), but can be fitted on the wheel axle too, using our BLB Universal Adjustable wheel bracket – as shown on Andrea’s Surly commuter. • W13.5cm x D26cm • aluminium • 2.5kg max load • will fit 700c wheels (no suspension fork) • 270gMore info & order
Porteur RackThe VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs. You can use our Straight Arms for Campeur Racks, Compression Hardware, and a pair of p-clamps around the rack's tube if you are running super heavy loads and want more stability. You can load it up with 40 lbs of gear if you use this configuration.More info & order
Campeur Rear RackThe VO Campeur Rack is designed for touring and commuting. It features a fully tubular stainless steel design with an upper deck and lower rail system. The lower rail keeps weight low and allows for easy pannier removal, even with the top platform loaded with a tent or dry bag. Stainless steel construction with a lovely, high polish finish. It won't rust like painted steel racks or fatigue and crack like some aluminum and powder-coated or painted racks. Long, lower rail helps gets your pannier further back to eliminate heel clipping. Straight, upper arms securely mount to your bike's seat stay bosses. There are a pair of eyelets under the top platform for direct mounting to the fender. A single rear, threaded eyelet is for a light mount. The top platform is 10 cm wide and 27 cm long. From the top of the rack to the lowest hole is 36.5cm. The lower tangs feature four sets of holes to fit most bikes with 26", 650b, 700c, and 27" wheels. Simply trim what you don't need or use the bottommost hole for an easy and quick installation. Maximum weight is 40 lbs.More info & order
Compression Daruma Hardware for Campeur Racks This is a set of stainless steel daruma hardware that is included with our Campeur Racks and is compatible with our cantilever or straight arms. This set is also compatible with Nitto's similar offerings. More info & order
Constructeur Rear RackThe VO Constructeur Rear Rack fills the need for an elegant, small, and sturdy rear rack for those of us who don't need a heavy duty touring rack. It will accept a set of small panniers for a multi-day trip, serve as a platform for a saddle bag, or carry a rack-top bag. All VO racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. The rack can be mounted two ways. Either directly to the rear fender using the threaded eyelets on the underside of the rack, or by using a strut (not included but available in regular or XL size) to mount to the seatstay bridge. The rack platform is 10.5cm x 26cm. The distance between the cross-pieces of the platform is 148mm. From the center of the bottom hole, the rack stands about 36cm tall. The mounting tangs are drilled in four spots to make it fit most bikes with 700c, 650b, or 26" wheels. 15lbs (6.8kg) maximum weight capacity.More info & order
Nitto rack staysNITTO optional stay NITTO Carrier. Aluminium stick 7mm / 400mm More info & order
Flat Pack RackThe Velo Orange Flat Pack Rack is designed to be super strong and adaptable, allowing it to be neatly mounted on nearly any bike with rack mounts on the fork blades. Adjustability is accomplished by employing sliding stays and darumas to dial in the position and level of the rack. With so many forks out there riddled with eyelets and holes for low-riders and 3-pack mounts, you can choose where the rack will mount. The platform is known as a “demi-porteur”. Its size is somewhere between a full Porteur and traditional Randonneur front rack. The main benefit to the demi-porteur style is better stabilization for large Randonneur Handlebar Bags as well as better support for baskets and large, bikepacking bags. The uprights are removable and can be interchanged between a decaleur receiver for a Randonneur-style handlebar bag and a tombstone loop for a basket or other luggage. When disassembled, it can fold almost completely flat - which is really useful for travel where space is at a premium. The Flat Pack Rack mounts to the fork crown using a little do-dad we call a Foot. This beefy mount sits flat against the fork crown and is also mounted to a daruma-style receiver, so it can slide up or down and in and out depending on your clearance needs. The lower portion of the stays are curved in such a way that they can mount flush on the side of your fork's blades. Additionally, the front of the rack features a braze-on for a light mount. The kit includes all the hardware you need to install the rack on most bikes: Four aluminum alloy stays - use two for a weight capacity of 12 lbs or use all four for a weight capacity of up to 17 lbs. Five daruma assemblies Decaleur receiver Backstop Foot with M6 bolt, washer, and nylock nut Screws for fork mounting Details: Platform size: 27.5cm x 20.3cm Weight (including all hardware): 708g Material: Stainless steel platform, backstop, and mounting hardware. Aluminum alloy stays and daruma. Weight capacity: 12lbs with two stays / 17lbs with all four staysMore info & order
Nitto Campee 27RHier hebben we de koning van de bagagedragers van Nitto. Stevig, kloek en welgevormde vormgeving zijn dragers deel. Hand gefilletbrazed, (veel werk) van CrMo buisjes. De vierkante delen aan het midden/onderkant van de drager zijn afneembaar. Dat maakt em multifunctioneel. Verchroomde afwerking. Alle delen om de drager stevig aan je fiets te monteren zijn inclusief. Past op 28" , 700c wielen.More info & order
Nitto M-18Front carrier Cr-Mo tube Ni-chrome silver, Black, 26", 27". Fixation on fork adjustable. Included attachments, stay and bolt-nuts. More info & order