With freewheel function and fixed function
(Adjustment over seven turns with the screwdriver on the outside of the shaft)
Aluminum hub
Frame installation width: 120 mm Number of spoke holes
: 32
Shaft nut thread M10x1 Total shaft length
174 mm Flange distance
(symmetrical) 59 mm
Spoke hole diameter 67 mm
Spoke hole diameter 2.6 mm
Chainline 46 mm
Weight of hub: approx. 480 g
Drive mode Fixed gear:
Using a small flathead screwdriver, turn the set screw in the shaft on the sprocket side clockwise as far as it will go.
Note: In fixed gear, the pedals always rotate. Familiarize yourself with the riding mode before participating in traffic.
Drive Mode Freewheel:
Using a small flat-blade screwdriver, turn the adjustment screw clockwise as far as it will go, then turn it back 5 full turns.
Per piece: € 36,30
