The Dajia Cycleworks Far Bar is a fantastic, lightweight off-road touring bar designed to be used with road components. Unlike dirt drops of years past, these allow you to have a normal hood position in addition to an easy reach to the brake levers from the drops. These bars are compatible with bar-end shifters as well as integrated shifters.
The Far Bars have a 21 degrees of sweep, ~40 degrees of flare, drop of 110 mm, and reach of 76 mm.
These bars are a little different then road bars in terms of measuring the width. The listed width (44 or 48 cm) is measured center of the hoods to center of the hoods.
The overall width is 585mm for the 44cm model, 625mm for the 48cm model. Weight is 292g.
Available in Silver and Noir.
Specs:
Stem Clamp: 31.8mm
Grip: 23.8mm
Drop: 110mm
Reach: 76mm
Flare: 40deg
Sweep: 21deg
Sizes (C-to-C at hoods): 44, 48cmMore info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooks
Handlebar
The Dajia Cycleworks Far Bar is a fantastic, lightweight off-road touring bar designed to be used with road components. Unlike dirt drops of years past, these allow you to have a normal hood position in addition to an easy reach to the brake levers from the drops. These bars are compatible with bar-end shifters as well as integrated shifters.
The Far Bars have a 21 degrees of sweep, ~40 degrees of flare, drop of 110 mm, and reach of 76 mm.
These bars are a little different then road bars in terms of measuring the width. The listed width (44 or 48 cm) is measured center of the hoods to center of the hoods.
The overall width is 585mm for the 44cm model, 625mm for the 48cm model. Weight is 292g.
Available in Silver and Noir.
Specs:
Stem Clamp: 31.8mm
Grip: 23.8mm
Drop: 110mm
Reach: 76mm
Flare: 40deg
Sweep: 21deg
Sizes (C-to-C at hoods): 44, 48cmMore info & order
Velo Orange Drop Bar
A classic handlebar from old stock. The long flat curved shape is big enough to give you a comfortable handlebar position, and you can slide the handlebar position back and forth to achieve stability and comfort even on long distances.
Material: Aluminum
Handlebar Stem Clamp Diameter: 26.0mm
Brake Lever Diameter: 23.8mm
Finish: Polished
Usage: Road
Manufacturer: Velo OrangeMore info & order
NITTO XC handlebar aluminium anodized Heat treated. Width 730mm, Rise 48mm, 15° diameter 31.8-22.2mm, 395g
More info & order
The design resembles that of a classic handlebar, except that the flat handlebar ends curve upward slightly, so that curves are turned slightly outward and you can catch turns or drops without twisting your wrist. In the 1940s and 1950s, cycling fashion shifted to Maes-patterned handlebars, but the rando is still a good choice for long rides and bad pavement.
Polished alloy
Collar diameter 25,4mm
Drop 120mm
Range 105mm
Weight 300grMore info & order
Swept back town bike handlebar with generous width and leverage. Good option when using a porteur rack, basket or bar bag, since it doesn't sweep too forward.
• 6061-T6 aluminum
• Polished finish, silver or black
• Width: 650mm
• Rise: 25mm
• Center: 31.8mm
• Grip Area Diameter: 22.2mm
• Grip Area Length: 160mm
• Backsweep: 73°
• The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers.
• Bends forward 22° before bending backwards.
• Weight: 465 grams
A design collaboration with Dream Cycle VancouverMore info & order
The original Dirt Drop Bar was designed many years ago by the three original founders of WTB, Charlie, Steve ,and Mark. This bar was incredibly successful in it's performance and many imitations have been developed over the past years by many different companies.
Steve Potts has come out with a new "Original" version that has has some changes that have improved the performance and placement of the modern controls and different hand positions for the long rides. The bars are made at Nitto, the premiere bar maker in the world!
• Aluminum
• Polished finish in black and silver
• Width at ends: 60cm
• Flare Out: 25°
• Drop Flare: 30°
• Reach: 104mm
• Drop: 133mm
(Reach and drop are measured with the ends tilted down 20°. These figures will vary depending bar how much you angle the ends down.)
• Weight: 365g
• Made in Japan by NittoMore info & order
Nitto B132 Randonneur stuur
25,4 mm klemming
Breedte 420 mm hart op hart gemeten
Buitendiameter: 23,8 mm
Drop: 110 mm, bereik: 122 mm
Gewicht: ca. 300 g bij 420 mmMore info & order
Compact round bend design with single cable groove in front and flat spots on ramps.
– Heat treated aluminum
– Clamp diameter: 26.0mm
– Drop: 128mm
– Reach: 78mm
– Wt.: 280gMore info & order
The Granola-Moose is a beautiful one-piece bar and stem combo. It's based on our popular Granola Bar and features an integrated 1 1/8" clamp for threadless steerers. This integrated design makes for a truly buttoned up and streamlined appearance on your city, touring, or mountain bike.
Made from 4130 chromoly steel, this bar has a bunch of details that really makes it special. The steel is heat-treated, the tubing of the bar has multiple butting profiles, the front cross bar is slightly flattened for your lights and/or gizmos, and the system has been tested to stringent MTB standards. All in all, the Granola-Moose makes for a fun, unique, and comfortable upright handlebar.
Width: 660mm
Sweep: 60°
Grip length: 170mm
Rise/drop: 33mm
Steerer clamp diameter: designed for 1 1/8" threadless stems or with 1" adaptor
Grip diameter: 22.2mm
Stem length equivalent: 100mm
Cross bar diameter: 22.2mm
Weight: 926gMore info & order
A handlebar with a groove for brake cables based on Nitto M106. It is a trendy anatomical shallow curve, but it is an excellent handlebar with GrandBois' basic specifications.
Width: 410 mm
Reach: 78 mm Drop: 128 mm Clamp diameter: 26.0 mm Weight: 318 g / 410 mm
Made in Japan.More info & order
The Seine Bar is an offroad-worthy riser bar featuring a super comfortable position with loads of real estate and leverage for long days in and out of the saddle.
Straddling the line between touring and full-on MTB, these bars are wide - 780mm to be exact. This width allows you to select climbing lines with ease and navigate bumpy descents without drama. If they're too wide for your trail or your commute, they can still be cut down to really dial in your fit.
The rise is a cool 40mm and sweep is 35°. So while these were mainly designed to satisfy off-road touring enthusiasts' mixed terrain needs, they are an excellent option for commuters and flat-bar gravel connoisseurs alike.
At 205mm in length, the grip area is more than enough for modern sized grips, brake levers, and shifters - and there is still room to cut down if they are too wide from the get-go. The clamp diameter is 31.8mm and the grip diameter is 22.2mm.
Width: 780mm
Sweep: 35°
Grip area: 205mm
Rise/drop: 40mm
Stem clamp diameter: 31.8mm
Grip diameter: 22.2mm
Weight: 443g
Material: Aluminum Alloy
MTB approved
Bead-blast finish in Silver and NoirMore info & order
NITTO touring handlebar. Aluminium anodized silver. Clamp diameter 26mm, Heat Treated for 460, 480mm
More info & order