Attachable with a bag mount.
A front rack is needed for this bag.
Volume: 12L
Total size: 270 x 270 x 145mm
Front pocket: 230 x 120 x 35mm closed with an elastic loop and a hook.
Two pockets on each side: 100 x 100 x 40mm closed with an elastic loop and a hook.
Two back pockets: 100 x 65 x 35mm closed with an elastic loop and a hook.
Transparent mapholder: 245 x 130 closed by Velcro.
Made with very strong cotton water resistant canvas. Finished with leather for the edges and reinforcements.More info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooks
Products
Attachable with a bag mount.
A front rack is needed for this bag.
Volume: 12L
Total size: 270 x 270 x 145mm
Front pocket: 230 x 120 x 35mm closed with an elastic loop and a hook.
Two pockets on each side: 100 x 100 x 40mm closed with an elastic loop and a hook.
Two back pockets: 100 x 65 x 35mm closed with an elastic loop and a hook.
Transparent mapholder: 245 x 130 closed by Velcro.
Made with very strong cotton water resistant canvas. Finished with leather for the edges and reinforcements.More info & order
These simple polished struts are ideal for mounting your racks to your bike's bridge or fork crown, if they happen to not directly fit. Available in small and large (8,5cm or 15cm) from front to end.More info & order
These non-quick release skewers require a special Allen wrench (included) to open, thus stopping any wheel thieves out there. Sold in pairs.
Compatible with frame spacing from 127mm to 135mm.More info & order
What's with the name? This upright stem keeps your back happy with its 45 degree angle. 4-bolt plate on the 31.8mm clamp. Because of its design, no stem cap is needed. A longer compression bolt is included. (stem does not work with the threadless stem adaptor, and is not to be used with carbon steerer tubes).
Available in black and silver, with extension lengths of 90mm and 110mm.
Steerer clamp is 1-1/8". Atleast 37mm of steerer is requiered. Weighs 203g (90mm size).More info & order
Convenient bag for bottle or tools.
Tools, food, your phone, everything in 1 place.More info & order
A simple, polished all-silver stem with a clamp diameter of 26mm. Available in 6 or 17 degree rise/drop, and a variety of extension lengths. 4 bolt handlebar clamp.
Steerer clamp: 1-1/8"
Stack height: 40mm
Weight: 140g (100mm size)More info & order
Saddle wax is indispensable for a saddle. The wax will help keep the leather nice and soft and will repel water. More info & order
The saddle tops by Berthoud Cycles.
More info & order
The Vars saddle by Berthoud Cycles is made of thick, natural vegetable tanned leather. Beforehand, the leather has been eased and made waterproof. The leather is attached at the back of the saddle to keep the rivets away from the rider. With a width of 180mm, this saddle is perfect of commuters and cyclists who prefer a more upright position. The rails are made of titanium which makes it easy to adjust.
Width: 188mm
Length: 278mm
Weight: 445 gramsMore info & order