Categories
Products
Randonneur Front RackThis is a stainless steel front rack that is perfect for a handlebar bag, tied-down dry bag, or basket. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.7 cm long and 10.2 cm wide. The tombstone (backstop) is 9.5 cm tall. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of your bag to ensure it says put over the rough stuff. If you are getting a custom frame made, we suggest sending the rack to the builder beforehand and let them know that the eyelets should be about 100mm below the bottom of the fork crown. 5.4kg max weight capacity. All mounting hardware is included. Compatibility note: Your fork's eyelets need to be 100mm from the fork crown bolt. Anything larger than that and this rack probably won't work.More info & order
Randonneur Front Rack, CantileverThis is a stainless steel front rack that is perfect for a handlebar bag, tied-down dry bag, or basket. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.7 cm long and 10.2 cm wide. The tombstone (backstop) is 9.5 cm tall. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of your bag to ensure it says put over the rough stuff. If you are getting a custom frame made, we suggest sending the rack to the builder beforehand. 5.4kg max weight capacity. All mounting hardware is included. Installation instructions found here. This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack if you don't have cantilever brakes. More info & order
Randonneur Front Rack with Integrated DecaleurThis is a stainless steel front rack that is perfect for a handlebar bag. The decaleur (bag mount receiver) is integrated into the rack platform. The advantage to this system is: your bag-decaleur-rack combination is more solid, lighter, and less likely to rattle. Integration is the Holy Grail of Constucteur-style bikes, and we feel that these racks are a big step in that direction. All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are mounts for lights. The platform is 20.7 cm long and 10.2 cm wide. Most traditional style handlebar bags work perfectly with this rack (any bag around 20cm tall), but very tall bags may need a longer bag mount. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of the bag to ensure it says put over the rough stuff. This rack requires eyelets (not low riders) on the fork blades or the use of p-clamps (included). If you are getting a custom frame made, we suggest sending the rack to the builder beforehand and let them know that the eyelets should be about 100mm below the bottom of the fork crown. 12lbs (5.4kg) max weight capacity. All mounting hardware is included. Compatibility note: Your fork's eyelets need to be 100mm from the fork crown bolt. Anything larger than that and this rack probably won't work. In that case, we suggest the VO Flat Pack Rack for greater adjustability.More info & order
Randonneur Front Rack with Integrated Decaleur, CantileverThis is a stainless steel front rack that is perfect for a handlebar bag. The decaleur (bag mount receiver) is integrated into the rack platform. The advantage to this system is: your bag-decaleur-rack combination is more solid, lighter, and less likely to rattle. Integration is the Holy Grail of Constucteur-style bikes, and we feel that these racks are a big step in that direction. All VO racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.5 cm long and 10.2 cm wide. Most traditional style handlebar bags work perfectly with this rack (any bag around 20cm tall), but very tall bags may need a longer bag mount. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of the bag to ensure it says put over the rough stuff. If you are getting a custom frame made, we suggest sending the rack to the builder beforehand. This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack with Integrated Decaleur if you don't have cantilever brakes. 12lbs (5.4kg) max weight capacity. All mounting hardware is includedMore info & order
Seine handlebarThe Seine Bar is an offroad-worthy riser bar featuring a super comfortable position with loads of real estate and leverage for long days in and out of the saddle. Straddling the line between touring and full-on MTB, these bars are wide - 780mm to be exact. This width allows you to select climbing lines with ease and navigate bumpy descents without drama. If they're too wide for your trail or your commute, they can still be cut down to really dial in your fit. The rise is a cool 40mm and sweep is 35°. So while these were mainly designed to satisfy off-road touring enthusiasts' mixed terrain needs, they are an excellent option for commuters and flat-bar gravel connoisseurs alike. At 205mm in length, the grip area is more than enough for modern sized grips, brake levers, and shifters - and there is still room to cut down if they are too wide from the get-go. The clamp diameter is 31.8mm and the grip diameter is 22.2mm. Width: 780mm Sweep: 35° Grip area: 205mm Rise/drop: 40mm Stem clamp diameter: 31.8mm Grip diameter: 22.2mm Weight: 443g Material: Aluminum Alloy MTB approved Bead-blast finish in Silver and NoirMore info & order
Honjo H27Aluminium polish Hammered, wide 35 mm, height 17 mm for 700x23-28C, R358x840(FR)x1200(RE). Fixation set, 1 pair of stay 4mm, 4 tightening stays Maki (roll), 2 hangers, 2 tighting stay-fender.More info & order
MKS Ezy Superior adapter setThis is a handy solution for cyclists with more than 1 bike. Well, now I'm addressing a small minority, every cyclist knows that. Share the same pedals on multiple bikes! Just install a set of Rinko adapters on each bike, and then you can swap any MKS "EZY-Superior" Rinko pedal in seconds, without tools.More info & order
IMPERO ULTIMATE FRAME PUMPThe perfect roadside option when a mini-pump just takes too long. The classic option for mobile inflation has been updated to use a two stage gasket, leather piston, and has a snug fit on the frame.More info & order
Wald 257• Made in U.S.A. (Maysville, KY) • The rack measures 20 1/2” side to side x 13” front to back • Extended handlebar clamps are 2” apart, allow greater clearance for shift and brake cables, and fit 7/8″, 1″and 1 1/4″ diameter handlebars • Legs extend from 13 3/4” to 21 1/4 “and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs • Powder Coat Finish • Complete rack with fittings weighs 6.0 lbs.More info & order
IRD seatpost Wayback A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small. Allows your saddle to be set back 50mm...almost 2 inches. A good seatpost for Brooks, which have shorter clamping area on its rails. NOTE: Published lengths are the length of the SHAFT ONLY. So length to the rails is actually LONGER by about50mm. So the 250mm size is actually 300mm long (to where the saddle rails cradle on the rocker piece). The 300mm size is actually 350mm long. - Aluminum head and rocker - Single bolt design - Tange Prestige CrMo shaft - 250 or 300mm long - Black or silver anodized - Wt.: 420g (250mm) - ONLY in 27.2mm and 26.8mm OD presently More info & order
Honjo H1 700cAluminium polish fluted, wide 44 mm, height 19 mm for 700x28-32C, More info & order
Miche hub Primato shim 9v/10v/11v silver9v/10v/11v, shimano passing. 130mmMore info & order